How do I hook up a mixer to the rest of the system? What jacks are best to use? How do I use graphic equalizers? What are compressors used for? How do I use groups? How do I set up monitor mixes? How do I set up the mixer to add effects? Here we go… And note that all of the topics addressed in this article are illustrated in Figure 1. Connect each mic to the stage box snake.
How to connect a Surface Book to an external display Want to bypass the Surface Book’s touch-screen display for something bigger? We’ve refreshed this list to ensure you’re still getting the best possible means of connecting a Surface Book to an external display. The Microsoft Surface Book has a gorgeous, detachable touchscreen, which makes it an amazing portable laptop or tablet, depending on your needs.
However, if you want to get some serious work done or are planning on logging some serious screen hours, it can be really handy to attach a second display to your Surface Book so you can mirror your small screen on something bigger or enjoy an extended viewing area with a second screen. The exact method of connection depends on a few factors:
Connect aux 1 out to the power amp channel for the vocalists’ monitor loudspeakers. Then use all the aux 2 knobs to set up a monitor mix for the drummer. Connect aux 2 out to the power amp channel for the drummer’s monitor loudspeaker.
How would you like to have to never worry about your stage monitors again? How about cutting your setup time in half or even more? In-Ear monitoring has many other benefits including: Lower on-stage volume which reduces chances of mic feedback. Consistent mixes for each band member—no more having to tell the FOH engineer to turn someone up or down in the stage monitors.
Better FOH mixes as the engineer can focus on the band mix and not the monitors. A better looking stage—again, no stage monitors getting in the way. Less chance of hearing damage from loud on-stage volumes—assuming you keep your in-ear monitor levels reasonable. Splitting Your Outputs Generally speaking, all of your instrument and mic outputs are going to end up being plugged into the stage box going to front of house.
The first step is to split your outputs so that you can have one set going to front of house, the other to your monitor system.
How can I hook up my studio monitors to my television?
The good news is that there are mic to USB adapters. Microphones produce an analog output signal, and usually their output levels are quite low. Also, condenser microphones, which are considered the superior type for studio recording, require external power. So what we need is this: All you really need:
You will connect USING BALANCED TRS audio cables from the MAIN L and R jacks on the top of the unit to your powered main speakers and also connect the monitor speakers by TRS balanced connections to the MON1 and MON2 1/4 inch jacks on the top deck of the unit.
There is no shame or handicap in this, let me be clear. In fact this is how I started out my recording career and it served me well! Most near-field monitors are measured by the largest speaker cone size and come in a few different flavors. What you need to figure out is which size of course. Despite the obvious suggestion by some to get the biggest speaker you can afford for the purposes of better bass response, I say forget all that.
Choose a speaker size that better matches the size of your control room. In fact, I mix on 5 inches in my own studio.
Unless you live under a rock — like those cavemen in the television commercial, you know that thousands of professional musicians rely upon in-ear monitoring, and for good reason: Again, in-ears will take you places that floor wedges or traditional headphones never dared to tread. No matter what genre of music you play, IEM technology can radically improve both the quality of your musical performance as well as your enjoyment of the sound of your band in a live venue. Getting started with in-ear monitoring can seem confusing because it requires understanding a few different pieces of the puzzle and learning how they fit together.
Since companies advertise individual parts of the puzzle, many newcomers to the in-ear monitoring world find themselves unsure exactly where to begin. But keep in mind that the one-size-fits-all approach rarely works as well as the custom variety, even when the products include multiple sized tips.
Apr 19, · Because the Surface Pro is running Windows 8, you could get a USB port hub and USB video cards and the Surface Pro would be able to install the drivers so you could hook up multiple monitors that way.
Show who you are to those posh cables! LOL After investigating the cables, I think it would be really really useful to also check the connectors, which I guess may be way more significant in the transmission of the signal. A frequency analyzer would be informative as well. Anonymous Your right though a null test would of been good, it was mentioned but we ran out of time. Did you look at the screen grabs posted above? Random error is, after all, just that. Of course, that all takes time, and I appreciate that you did a test at all.
Maybe if you posted up the. Most notably at about 22Hz and 44Hz.
How to Switch to an External Monitor on a Dell Laptop
This is something that has always plagued engineers and will continue to do so for years to come. Everybody listens to music on a different set of speakers. And no two sets of speakers sound the same. So a perfectly crafted mix on one pair of speakers could sound really bass-heavy and muddy on another pair. Now imagine that you have a magical set of speakers that make you sound amazing. Everything you sing through them is just heavenly.
Shop studio monitors at Best Buy and enhance your recording setup. Compare and purchase online from a variety of studio monitors including floor monitors, subwoofers.
When it comes to your studio recordings, you want honesty. In fact, considering how important your art is, you should demand it! Due to their high-resolution performance, B A active 2-way reference studio monitors are perfect for nearfield monitoring applications: Powered by separate and Watt built-in amplifiers with an active crossover, these monitors provide ultra-linear frequency response from 50 Hz to 21 kHz.
Behringer Calls it a Speaker Graduation Diploma After final assembly, each B A spends up to a half hour with a Calibration Engineer being meticulously tweaked to ensure ultra-linear frequency response. Behringer ship a calibration certificate with each B A that shows the actual frequency response of your monitor, as tested at the time of manufacture. After all these rigorous tests, only then is the speaker granted its own Graduation Diploma.
Rock-Solid Bass Bookshelf-style home stereo speakers can really fool you when it comes to bass output, mainly because they are not designed for critical listening applications. That’s why recording engineers and producers listen to projects through studio reference monitors or studio-grade headphones.
The B A’s long-throw 8. Bass content that isn’t exaggerated, as it can be in home speaker systems.
How can I use the Mac Mini with two monitors?
Connecting the MacBook to a Dell external monitor increases the size of your display, so you don’t need to spend extra money on a separate workstation. Depending on your MacBook and monitor hardware, you may require a video adapter cable to connect the two devices. Turn off your MacBook and the Dell monitor. Failure to do this may prevent your MacBook from recognizing the Dell monitor.
Determine if you will need to use a video adapter to connect the monitor by checking the video input ports on the device. This adapter ships with MacBook Pro models, but you also can purchase it from Apple.
A funny thing about studio monitors: The first time you hear audio played through a quality monitor with a flat response curve, it may sound all wrong. But that’s only because your ears are used to consumer-market stereo speakers, which use tuning tricks to artificially create bigger, punchier bass, and more pleasant and friendly highs among other things.
Any ‘pop’ as the system switches on or off will be at full volume on the speakers, so always switch them off before a reboot, power-down etc. The latency is an issue if you’re recording, or re-recording, but it is not if you’re using your monitors mostly for playback. Having said that Still now NO internal sound card soldered in the mobo is even remotely comparable with a dedicated one. Prices vary from 50 something dollars, pounds, euros to thousands At price tag you begin to find proper PROsumer Cards or converters.
They are not Speakers Well, they are, but they sound very very differently from Lounge Hi-Fi ones You can’t change amplifiers, pres, put one with tubes, another with fets, separate,bimonos, integrated, etc You HAVE to deal with the ones inside the box and take them as they are They dont have to be! Monitors dont have to sound good, they have to sound TRUE!! Today I listened to a pair of Tannoy Studio Monitors biamped, active and they are Night and day from the “Audiophile” line Tannoy makes passive.
But anyway they are Warm, decent sounding for a Monitor Well, as monitors I would never ever buy them, but for listening they are better than most speaker in the same price range and above, sometimes far above